Analysis Plus - Power Oval 2 MK II (5ft)
The Power Oval 2 MKII has a new braid design on the shield and the size has increased to 10 gauge. According to literature, transient noise voltages in power distribution systems are produced by sudden changes in current demand. A low impedance transmission line design, such as that used by Analysis Plus Power Cord Oval cable, is recommended to minimize this noise. The current carrying conductors are then surrounded with a shield to prevent pick-up of high frequency noise. Terminated with WattGate connectors.
When people design power cords they use massive cable to reduce the noise voltage on the cable. The noise voltage that occurs on the cable is related to L (inductance) and di/dt (the rate of change in the current). You can reduce L by using larger gauge wire but you don’t get much bang for your buck because it is a log function. What this means is that as you keep increasing the gauge of the wire you do not get much improvement for your effort. This is why you see people using very heavy and stiff wires in power cords. I have seen some power cords that are so big and stiff that the CD player connected to them is lifted off the ground. What we have done at Analysis Plus is use computer simulation to optimize the design of a power distribution system. What we discovered is our patented hollow oval design provides a low L cable without having to use stiff and bulky cables. Our cables have a super low noise voltage to reduce the background noise to a minimum. This is extremely important during quiet passages, if you want to hear subtle details (this is very important for classical music fans and for other lovers of live music). The other thing people don’t realize about low frequency noise is that the thin aluminum shield found on many power cords does nothing to reduce this problem. The best way to reduce low frequency noise on cables is to reduce loop area. From our computer simulation and measurements we found our patented hollow oval cables does a great job at this. We have the lowest noise voltage we have seen with our hollow oval design. For higher frequencies our silver-plated copper braided shield does a great job. We used an open braid design that works much like the window on your microwave oven. You can see through the window but the radiation stays where it belongs.
Terminated with WattGate connectors, this power cable is engineered to deliver your audio/video components the clean power they deserve. Can be terminated with 20 amp IEC instead of 15 amp. Also can be terminated with Schuko plug instead of US plug as seen in product gallery images.
** Shipping Cost to Hong Kong and Macau will be charged by SF Express (Pay by receiver)
David Laboga - Jason Kui Signature MK II
DL Jason Kui Signature Cable MK II LIMITED EDITION 100 PCS **Will be available for ordering on 15 Feb 2020** Fatter Sound Less Dust in Highs More Natural Sound Gives...
David Laboga - Mega Raptor MK2 (150cm)
HIGH END SPEAKER CABLES / MEGA RAPTOR MK2 Series NEW UPGRADED PRODUCT 2020 !!! HIGHER Performance than MK1 High-bandwidth power in a low-impedance environment CABLE IS DEDICATED FOR GUITAR...
David Laboga - Bass Series (10ft)
While traveling the journey of bringing spirit to the sound our next stop was the bass stop. We decided that we will initiate a king of duality according to building...